AP C510T Smart Aroma Diffuser

The AP C510T Aroma Diffuser is a compact, Bluetooth enabled fragrance device designed for efficient scent dispersion in areas up to 45 m². Built with a durable aluminum and PP housing and powered by a 2000 mAh battery with Type C charging, it offers multiple diffusion grades, three ambient light color options, and intelligent vibration sensing features that automatically power the unit off when no movement is detected. The diffuser supports most 5 ml essential oil bottles and includes a removable diffuser head, gasket system, and indicator lights for power, charging, and operating status. Its simple one button control allows users to switch grades, toggle ambient lighting, and manage diffusion cycles, while built in safety protections prevent overheating, leakage, and improper operation. Routine alcohol based cleaning and clear troubleshooting guidance ensure stable long term performance in clean indoor environments.

Technical Specifications

Feature Details
Model AP C510T
Power 5W MAX
Input Voltage 5V / 1A
Battery Capacity 2000mAh Lithium-ion
Charging Port Type-C
Material Aluminum + PP
Coverage Area 15m² / 45m² / 160ft²
Bottle Capacity 15ml
Dimensions 69 x 129 mm
Weight 314g

Quick Start Guide

Remove the Head

Pull up the diffuser head and the attached bottle from the main machine body.

Refill

Twist off the bottle and fill it with your favorite essential oil (compatible with most 15ml bottles).

Assemble

Twist the bottle back onto the diffuser head and press the head firmly back into the machine.

Charge

Connect the included Type-C cable to a 5V/1A power source.

Power On

Long-press the power button to start diffusing.

Controls & Working Modes

The AP C510T features intuitive controls to customize your environment:

Power / Grade Button

. Long Press: Power ON/OFF.
. Short Press: Cycle through intensity grades (G1, G2, G3).

Light Button

. Short Press: Switch between ambient light colors (Blue, Orange, Purple).

Diffusion Intensity Settings

Grade Mist Time Pause Time Oil Consumption
G1 (Low) 5 Seconds 150 Seconds 0.03 g/h
G2 (Medium) 10 Seconds 120 Seconds 0.07 g/h
G3 (High) 10 Seconds 60 Seconds 0.15 g/h

Smart Features

1

Car Motion Sensor:

Designed for automotive use, the device enters Standby Mode automatically if no vibration is detected for 1 minute. It instantly resumes operation when it detects vehicle movement or vibration.

2

Intelligent Charging

1- Red Light: Charging in progress.
2- Green Light: Fully charged.
3- Full Charge Time: Approx. 4 hours.
4- Battery Life: Up to 24 hours of continuous use on Grade 1.

Critical Safety & Maintenance

To ensure the longevity of your device, please follow these guidelines:
backgrond-pic

Keep it Vertical

DO NOT tilt, lay flat, or invert the machine once the oil bottle is installed. This prevents oil from leaking into the circuit board and causing permanent damage.

backgrond-pic

Charging Safety

Use only standard 5V adapters. DO NOT use Quick Chargers (Fast Chargers) as they may damage the battery.

backgrond-pic

Environment

Do not use or store the device in temperatures exceeding 60°C or in highly humid areas.

backgrond-pic

Cleaning

If the mist becomes weak, clean the atomizing core by diffusing a small amount of medical alcohol.

Troubleshooting

Issue Potential Cause Solution
No Mist Output Blocked nozzle or empty bottle Clean the nozzle with alcohol or refill the essential oil.
Weak Diffusion Clogged atomizing core or loose tube Clean the core with alcohol; check if the internal tube is firmly connected.
Oil Leakage Loose bottle or damaged gasket Ensure the bottle is tightened securely; check the rubber gasket for wear.
Oil Spillage Device was tilted or laid flat Always keep the device upright. Clean any external oil immediately.
Abnormal Noise Loose air pump Ensure the device is on a stable surface. If the noise persists, contact support.

Need further assistance?

If your issue is not listed above, please contact our customer service team with your order details.