Maintenance & Cleaning Guide
When to Clean Your Diffuser
1- When changing essential oils:
To prevent scent cross-contamination.
2- When diffusion becomes weak:
To clear potential blockages in the atomizing core.
3- Every 1–2 months:
For regular preventative maintenance.
4- Before storage:
If the device will be inactive for more than a week.
How to Clean
Step 1:
Remove the oil bottle and atomizing head from the device.
Step 2:
Soak the atomizing head and empty bottle in isopropyl alcohol (70–99%) for 10 minutes.
Step 3 (Deep Clean):
For stubborn clogs, fill a bottle with a small amount of alcohol and run the diffuser for 5 minutes.
Step 4:
Allow all parts to air-dry completely.
Step 5:
Reassemble, refill with oil, and reset the oil level (hold the SET button for 3 seconds on supported models).
Important Safety & Maintenance Notes
1- Stay Upright:
Always keep the device vertical. Tilting or laying it flat while oil is present can cause permanent damage to the electronic components.
2- Dry Cleaning Only:
Do not use water or harsh household chemicals to clean the internal parts.
3- No Fast Charging:
Use a standard 5V/1A power source. Avoid "Quick Charge" adapters to ensure battery longevity.
4- Check Seals:
Ensure the rubber gaskets are properly seated during reassembly to maintain the vacuum required for misting.
